Namespace CAMIPC.ModelFormerTypes

Interfaces

IPC: Base surface configuration for engraving / curve-on-surface operations. Mirrors ICamApiBaseSurface. Singleton owned by the model former — every call to ICamIpcModelFormerWithBaseSurface.BaseSurface returns the same underlying editor. Setting a property mutates the former state immediately.

ICamIpcBossProbingCycle

Boss probing cycle geometry. XML type: TBossProbingCycle.

ICamIpcBoxLinkPrimitiveModelItem

ICamIpcBoxPrimitiveModelItem

ICamIpcBridgeParams

IPC: Configuration bag for bridge (tab) generation. Mirrors ICamApiBridgeParams. Obtain via ICamIpcModelFormerWithBridges.CreateBridgeParams.

ICamIpcCalibratePartProbeProbingAction

Calibrate Part Probe action. XML type: TCalibratePartProbeCycleAction. Calibrates the part-measurement probe against a reference surface.

ICamIpcCalibrateToolProbeProbingAction

Calibrate Tool Probe action. XML type: TCalibrateToolProbeCycleAction. Calibrates the tool-length probe against a reference tool.

ICamIpcCastingPrimitiveModelItem

Casting (stock-offset) workpiece primitive item. Wraps TStockLinkItem — the part model geometry with a uniform stock offset.

ICamIpcCheckBrokenToolProbingAction

Check Broken Tool action. XML type: TCheckBrokenToolCycleAction. Compares the measured value against the stored offset to detect tool breakage.

ICamIpcCurve2DModelItem

ICamIpcCurve2DModelItemWithBridges

IPC: Mixin on ICamIpcCurve2DModelItem giving typed access to the list of bridges (tabs) placed on this curve. Obtain via QueryInterface from a curve item returned by AddCurves2DSelected / GetItem on a curve2D former. Mirrors ICamApiCurve2DModelItemWithBridges. Implemented by TCurveOpAddInfo.

ICamIpcCurve5DModelItem

ICamIpcCurveBridgeModelItem

IPC: Single bridge (tab) on a 2D curve model item. Obtained from ICamIpcCurve2DModelItemWithBridges.GetBridge / AddBridge. Mirrors ICamApiCurveBridgeModelItem. The bridge lives inside the parent curve item; if the parent curve removes or replaces its bridges, previously returned wrappers become invalid — re-acquire via GetBridge.

ICamIpcCustomProbingAction

A single custom property inside a cycle. XML type: TProbingCycleCustomProp. Used both as standalone action and as a member of a custom prop group.

ICamIpcCustomPropGroupProbingAction

Custom property group action. XML type: TProbingCycleCustomPropGroup. Container that holds multiple ICamIpcCustomProbingAction items.

ICamIpcCylinderPrimitiveModelItem

ICamIpcDoubleWallExternalCornerCycle

Double wall external corner probing cycle. XML type: TDoubleWallExternalCornerCycle.

ICamIpcDoubleWallInternalCornerCycle

Double wall internal corner probing cycle. XML type: TDoubleWallInternalCornerCycle.

ICamIpcDriveFaceModelItem

Model item representing a drive face (added via ICamIpcModelFormerWithDriveFaces.AddDriveFacesSelected)

ICamIpcEmptyWorkpieceModelItem

ICamIpcExternalRectangleProbingCycle

External rectangle probing cycle geometry. XML type: TExternalRectangleCycle.

ICamIpcFeedPointList

ICamIpcFixtureComponentItem

ICamIpcFixtureConnectorItem

ICamIpcFixtureNodeItem

ICamIpcFrameOutputProbingCycle

Frame output probing cycle. XML type: TFrameOutputProbingCycle. TargetFrame and ParentFrame are 4x4 homogeneous matrices.

ICamIpcGeom25DModelItem

Model item representing 2.5D geometry (added via ICamIpcModelFormerWithGeom25D.AddSelected25D)

ICamIpcGeomModelBoxPrimitiveModelItem

ICamIpcGrooveProbingCycle

Groove probing cycle geometry. XML type: TGrooveProbingCycle.

ICamIpcGrooveProbingProtectedCycle

Groove probing protected cycle geometry. XML type: TGrooveProbingCycleProtected.

ICamIpcHoleCylinderPrimitiveModelItem

ICamIpcHoleModelItem

ICamIpcHoleProbingCycle

Hole probing cycle geometry. XML type: THoleProbingCycle.

ICamIpcHoleProbingProtectedCycle

Hole probing protected cycle geometry. XML type: THoleProbingProtectedCycle.

ICamIpcInternalRectangleProbingCycle

Internal rectangle probing cycle geometry. XML type: TInternalRectangleCycle.

ICamIpcInternalRectangleProbingProtectedCycle

Internal rectangle probing protected cycle geometry. XML type: TInternalRectangleProtectedCycle.

ICamIpcJobZoneModelItem

ICamIpcLevelModelItem

ICamIpcListModelItem

ICamIpcModelFormer

Model former for technology operation

ICamIpcModelFormerMakeSupportedItems

Callback method, to be called to fill supported items

ICamIpcModelFormerSupportedItems

List of supported items for model former

ICamIpcModelFormerWithAreas

ICamIpcModelFormerWithBaseSurface

IPC: Model former mixin for operations that support a base surface. Mirrors ICamApiModelFormerWithBaseSurface. Implemented by TCurveOpModelFormer and TEngraveModelFormer.

ICamIpcModelFormerWithBoxPrimitives

ICamIpcModelFormerWithBridges

IPC: Model former mixin for contour-based operations (TSTCurveOp descendants) that support adding bridges (tabs) as sub-items on curve model items. Mirrors ICamApiModelFormerWithBridges. Implemented by TCurveOpModelFormer.

ICamIpcModelFormerWithCastingPrimitive

Model former that can add a casting primitive workpiece.

ICamIpcModelFormerWithChamferFaces

Model former that supports adding chamfer faces from the current geometry selection (used by the Chamfering operation — "Add Face" button)

ICamIpcModelFormerWithCurve2D

ICamIpcModelFormerWithCurve5D

ICamIpcModelFormerWithCylinderPrimitives

ICamIpcModelFormerWithDriveFaces

Model former that supports adding drive faces from the current geometry selection

ICamIpcModelFormerWithFaces

ICamIpcModelFormerWithFixtures

ICamIpcModelFormerWithGeom25D

Model former that supports adding 2.5D geometry from the current geometry selection

ICamIpcModelFormerWithHoles

ICamIpcModelFormerWithJobMode

Model former mixin for the swarf operation: "Drive mode" toggle between bottom-edge and two-curves machining. Enum imported from CAMAPI.ModelFormerTypes.

ICamIpcModelFormerWithLevels

ICamIpcModelFormerWithPnPItems

IPC: model former mixin for TSTPointPickAndPlaceOp (TPnPPointJobModelFormer). Provides access to all Pick and Place items: Start, Pick, Place, End, and intermediate Move points.

ICamIpcModelFormerWithPocket

Model former that supports adding pocket features from the current geometry selection

ICamIpcModelFormerWithPointWeldingItems

IPC: Model former mixin for TSTPointWeldingOp (TPointWeldingJobModelFormer). Mirrors ICamApiModelFormerWithPointWeldingItems. Template semantics: ClearanceXxx / EngageXxx / RetractXxx / FixVX are read at weld-point creation time, not applied retroactively.

ICamIpcModelFormerWithPolygonalPrism

Model former that supports adding a polygonal prism workpiece primitive.

ICamIpcModelFormerWithProbingItems

Model former for probing operations job assignment. Allows programmatic manipulation of movements, cycles, and groups.

ICamIpcModelFormerWithProjectCurves

Model former that supports adding project curves from the current geometry selection

ICamIpcModelFormerWithReferenceToPrevious

ICamIpcModelFormerWithSharpEdge

Model former that supports adding sharp edges from the current geometry selection (used by the Chamfering operation — "Add Sharp Edge" button)

ICamIpcModelFormerWithSolid

Model former that supports sewing the selected faces into a single solid (workpiece-only — accessible via op.ModelFormerWorkpiece).

ICamIpcModelFormerWithTurnGeometry

Model former that supports adding turn geometry from the current geometry selection

ICamIpcModelFormerWithTurnMachineModel

Model former interface for TSCLatheExtOpConnector — exposes SetItemMode

ICamIpcModelFormerWithTurnWorkpiece

Model former that supports adding a turn workpiece primitive.

ICamIpcModelFormerWithZones

ICamIpcModelItem

ICamIpcModelItemReference

ICamIpcNcActionProbingCycle

NC action probing item. XML type: TNCActionProbingItem. OutputMode: 0 = EXTCYCLE, 1 = INSERT.

ICamIpcPnPClearanceItem

IPC: clearance point — auto-created child of Pick and Place items

ICamIpcPnPEndItem

IPC: end point of a Pick and Place operation

ICamIpcPnPMoveItem

IPC: intermediate move point of a Pick and Place operation

ICamIpcPnPPickItem

IPC: pick point of a Pick and Place operation

ICamIpcPnPPlaceItem

IPC: place point of a Pick and Place operation

ICamIpcPnPStartItem

IPC: start point of a Pick and Place operation (read-only)

ICamIpcPocketModelItem

Model item representing a pocket (added via ICamIpcModelFormerWithPocket.AddPocketSelected)

ICamIpcPointWeldingMoveItem

IPC: intermediate move point of a Point Welding operation. Mirrors ICamApiPointWeldingMoveItem.

ICamIpcPointWeldingWeldItem

IPC: weld point of a Point Welding operation. Mirrors ICamApiPointWeldingWeldItem.

ICamIpcPolygonalPrismModelItem

Polygonal prism workpiece primitive item. XML type: TSimplePolygonalPrism. A prism with a regular polygon cross-section (e.g. hexagonal bar stock).

ICamIpcProbingAction

Base interface for any probing cycle action (element of the CycleActions array). Use QueryInterface / AsInstanceOf to narrow to a typed action interface.

ICamIpcProbingCycle

Typed access to common probing cycle properties (TProbingCycle). Available via QueryInterface on ICamIpcProbingModelItem for cycle-type items.

ICamIpcProbingModelItem

Probing job assignment item (cycle, movement, group, action). Provides access to the item's XML type name for quick type identification.

ICamIpcProbingModelItemIterator

Cursor-style iterator over the probing job assignment tree. Supports depth-first traversal via MoveToChild / MoveToSibling / MoveToParent.

ICamIpcProbingTemplate

A single probing cycle template stored in a library.

ICamIpcProbingTemplateLibrary

A probing template library (.scpbl file).

ICamIpcProjectCurveModelItem

Model item representing a project curve (added via ICamIpcModelFormerWithProjectCurves.AddProjectCurvesSelected)

ICamIpcRestrictedZoneModelItem

ICamIpcSetToolOffsetProbingAction

Set Tool Offset action. XML type: TSetToolOffsetCycleAction. Writes the measured offset into the tool compensation register after probing.

ICamIpcSetWcsProbingAction

Set WCS action. XML type: TSetWCSCycleAction. Activates a work coordinate system offset after probing.

ICamIpcSimpleBoxPrimitiveModelItem

ICamIpcSimpleCylinderPrimitiveModelItem

ICamIpcSolidModelItem

Model item representing a sewn solid (added via ICamIpcModelFormerWithSolid.AddSolidSelected). Exposes all 4 editable properties — Stock mirrors inherited TFacesItem.Stock so callers don't need to QI between Face and Solid IPC interfaces.

ICamIpcSurfaceProbingCycle

Surface probing cycle geometry. XML type: TSingleSurfProbingCycle.

ICamIpcThreePointsWebProbingCycle

Three-points web probing cycle geometry. XML type: TThreePointsWebProbingCycle.

ICamIpcTripleWallExternalCornerCycle

Triple wall external corner probing cycle. XML type: TTripleWallExternalCornerCycle.

ICamIpcTripleWallInternalCornerCycle

Triple wall internal corner probing cycle. XML type: TTripleWallInternalCornerCycle.

ICamIpcTurnGeometryModelItem

Model item representing turn geometry (added via ICamIpcModelFormerWithTurnGeometry.AddTurnSelected)

ICamIpcTurnMachineModelItem

Model item representing turn machine geometry (added via ICamIpcModelFormerWithTurnGeometry.AddTurnSelected on a TSCLatheExtOpConnector operation)

ICamIpcTurnWorkpieceModelItem

Turn workpiece primitive item. XML type: TTurnLinkItem. A solid of revolution computed from the part geometry envelope.

ICamIpcWebProbingCycle

Web probing cycle geometry. XML type: TWebProbingCycle.

ICamIpcWeldSeamModelItem

Weld seam model item (item type "WeldSeam" on TWeldingOp5D / TWeldingOp6D formers). Also exposes ICamIpcCurve5DModelItem and ICamIpcProjectCurveModelItem via cast. Adds per-item Multipass override access.

ICamIpcWriteToReportProbingAction

Write To Report action. XML type: TWriteToReportCycleAction. Stores the measured value into a report with a component/feature index.

Namespace CAMIPC.ModelFormerTypes

Interfaces

Enums