Interface ISTGeomReceiver

Contains methods for importing geometry to CAM

Namespace: STGeomApiTypes
Assembly: STGeomApiTypes.dll
Syntax
[Guid("29F37F13-3E46-490A-BD58-24A0E4D7063E")]
[InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
public interface ISTGeomReceiver

Properties

Header

Header of the current file (format version + metadata). Write side (filer): valid only between StartFile and CloseFile; nil outside that window. Use it after StartFile to add metadata via Header.MetaWriter; CloseFile serializes it. See ISGFMetaWriter for a full write example. Read side (receiver): filled (via Assign) before the geometry stream.

Declaration
ISGFFileHeader Header { get; }
Property Value
Type Description
ISGFFileHeader

Methods

AddComboSolidEdge(string, string, string, string, string, string)

Add a edge to the ComboSolid (solid with topology)

Declaration
bool AddComboSolidEdge(string EdgeID, string CurveID, string StartVertexID, string EndVertexID, string LeftFaceID, string RightFaceID)
Parameters
Type Name Description
string EdgeID
string CurveID
  • The internal number of the created curve
string StartVertexID
  • The internal number of the start vertex (VertexID in AddComboSolidVertex)
string EndVertexID
  • The internal number of the end vertex (VertexID in AddComboSolidVertex)
string LeftFaceID
  • The internal number of the left face
string RightFaceID
  • The internal number of the right face
Returns
Type Description
bool

Success status

AddComboSolidFace(string, string)

Add a face to the ComboSolid (solid with topology)

Declaration
bool AddComboSolidFace(string FaceID, string FaceName)
Parameters
Type Name Description
string FaceID
  • The internal number of the created face (ID in StartFace)
string FaceName
  • The name of the entity in the geometric model tree
Returns
Type Description
bool

Success status

AddComboSolidVertex(TST3DPoint, string)

Declaration
bool AddComboSolidVertex(TST3DPoint P, string VertexID)
Parameters
Type Name Description
TST3DPoint P
string VertexID
Returns
Type Description
bool

AddEntity(string, string)

Add an entity to the geometric model tree

Declaration
bool AddEntity(string ID, string EntityName)
Parameters
Type Name Description
string ID
  • The internal number by which the entity will be found
string EntityName
  • The name of the entity in the geometric model tree
Returns
Type Description
bool

Success status

AddFaceEdge2d(string, bool, string, string)

Declaration
bool AddFaceEdge2d(string CurveID, bool Orientation, string svID, string tvID)
Parameters
Type Name Description
string CurveID
bool Orientation
string svID
string tvID
Returns
Type Description
bool

AddFaceEdge3d(string, bool, string, string)

Declaration
bool AddFaceEdge3d(string CurveID, bool Orientation, string svID, string tvID)
Parameters
Type Name Description
string CurveID
bool Orientation
string svID
string tvID
Returns
Type Description
bool

AddIntersectionCurvePoint(TST3DPoint)

Declaration
bool AddIntersectionCurvePoint(TST3DPoint Position)
Parameters
Type Name Description
TST3DPoint Position
Returns
Type Description
bool

AddMeshTriangle(int, int, int)

Declaration
bool AddMeshTriangle(int v1, int v2, int v3)
Parameters
Type Name Description
int v1
int v2
int v3
Returns
Type Description
bool

AddMeshVertex(int, TST3DPoint)

Declaration
bool AddMeshVertex(int Index, TST3DPoint P)
Parameters
Type Name Description
int Index
TST3DPoint P
Returns
Type Description
bool

AddPmiText(string)

Declaration
bool AddPmiText(string Text)
Parameters
Type Name Description
string Text
Returns
Type Description
bool

AddViewEntity(string, string)

Declaration
bool AddViewEntity(string ViewID, string EntityPath)
Parameters
Type Name Description
string ViewID
string EntityPath
Returns
Type Description
bool

ArcTo2d(TST2DPoint, TST2DPoint, double)

Declaration
bool ArcTo2d(TST2DPoint pc, TST2DPoint P, double rad)
Parameters
Type Name Description
TST2DPoint pc
TST2DPoint P
double rad
Returns
Type Description
bool

BeginObject_PMIThread(string)

Get IPMIGeomThread interface

Declaration
IPMIGeomThread BeginObject_PMIThread(string CADID)
Parameters
Type Name Description
string CADID

Unique CAD identifier
Returns
Type Description
IPMIGeomThread

IPMIGeomThread

BeginPmiEntity(string, TST3DPoint, TST3DPoint, TST3DPoint, TSTPmiType)

Declaration
bool BeginPmiEntity(string ID, TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX, TSTPmiType PmiType)
Parameters
Type Name Description
string ID
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
TSTPmiType PmiType
Returns
Type Description
bool

BeginPmiText(TST3DPoint, double, double, double, int, TSTPmiTextType)

Declaration
bool BeginPmiText(TST3DPoint vT, double Angle, double Height, double Length, int NumberLines, TSTPmiTextType TextType)
Parameters
Type Name Description
TST3DPoint vT
double Angle
double Height
double Length
int NumberLines
TSTPmiTextType TextType
Returns
Type Description
bool

BezierTo2d(TST2DPoint, TST2DPoint, TST2DPoint)

Declaration
bool BezierTo2d(TST2DPoint p1, TST2DPoint p2, TST2DPoint p3)
Parameters
Type Name Description
TST2DPoint p1
TST2DPoint p2
TST2DPoint p3
Returns
Type Description
bool

CloseBlock()

Finish forming a block (assembly element)

Declaration
bool CloseBlock()
Returns
Type Description
bool

Success status

CloseComboModel()

Finish forming a model with topology (ComboMode)

Declaration
bool CloseComboModel()
Returns
Type Description
bool

Success status

CloseComboSolid()

Finish forming a solid with topology (ComboSolid)

Declaration
bool CloseComboSolid()
Returns
Type Description
bool

Success status

CloseCurve2d(bool)

Declaration
bool CloseCurve2d(bool Close)
Parameters
Type Name Description
bool Close
Returns
Type Description
bool

CloseCurve3d(bool)

Declaration
bool CloseCurve3d(bool IsClosed)
Parameters
Type Name Description
bool IsClosed
Returns
Type Description
bool

CloseFace()

Finish forming the bounded surface (face)

Declaration
bool CloseFace()
Returns
Type Description
bool

Success status

CloseFaceLoop()

Finish forming the face loop

Declaration
bool CloseFaceLoop()
Returns
Type Description
bool

Success status

CloseGroupEntity()

Finish forming the geometric group

Declaration
bool CloseGroupEntity()
Returns
Type Description
bool

Success status

CloseIntersectionCurve()

Finish forming the intersection curve

Declaration
bool CloseIntersectionCurve()
Returns
Type Description
bool

Success status

CloseMesh()

Finish forming the mesh

Declaration
bool CloseMesh()
Returns
Type Description
bool

Success status

CloseModel()

Finish forming the model

Declaration
bool CloseModel()
Returns
Type Description
bool

Success status

CloseNurbsCurve()

Finish forming the NURBS curve

Declaration
bool CloseNurbsCurve()
Returns
Type Description
bool

Success status

CloseNurbsSurface()

Finish forming the NURBS surface

Declaration
bool CloseNurbsSurface()
Returns
Type Description
bool

Success status

CloseNurbsSurfaceB(double, double, double, double)

Declaration
bool CloseNurbsSurfaceB(double UMin, double UMax, double VMin, double VMax)
Parameters
Type Name Description
double UMin
double UMax
double VMin
double VMax
Returns
Type Description
bool

CreateArc(string, double, double, TST3DPoint, TST3DPoint, TST3DPoint)

Declaration
bool CreateArc(string ID, double Radius, double Angle, TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX)
Parameters
Type Name Description
string ID
double Radius
double Angle
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
Returns
Type Description
bool

CreateBlendBound(string, string, int)

Declaration
bool CreateBlendBound(string ID, string Blend, int Boundary)
Parameters
Type Name Description
string ID
string Blend
int Boundary
Returns
Type Description
bool

CreateBlendedSurface(string, string, string, string, double, double, TSTBlendedType, TST3DPoint, TSTLimitType, TST3DPoint, TSTLimitType)

Declaration
bool CreateBlendedSurface(string ID, string FirstSurfID, string SecondSurfID, string Spine, double Range1, double Range2, TSTBlendedType BlendedType, TST3DPoint p1, TSTLimitType L1, TST3DPoint p2, TSTLimitType L2)
Parameters
Type Name Description
string ID
string FirstSurfID
string SecondSurfID
string Spine
double Range1
double Range2
TSTBlendedType BlendedType
TST3DPoint p1
TSTLimitType L1
TST3DPoint p2
TSTLimitType L2
Returns
Type Description
bool

CreateCircle(string, double, TST3DPoint, TST3DPoint, TST3DPoint)

Declaration
bool CreateCircle(string ID, double Radius, TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX)
Parameters
Type Name Description
string ID
double Radius
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
Returns
Type Description
bool

CreateConeP(string, TST3DPoint, TST3DPoint, TST3DPoint, double, double, double, double, double, double)

Declaration
bool CreateConeP(string ID, TST3DPoint Location, TST3DPoint Axis, TST3DPoint RefAxis, double Radius, double SemiAngle, double Hmin, double Hmax, double Amin, double Amax)
Parameters
Type Name Description
string ID
TST3DPoint Location
TST3DPoint Axis
TST3DPoint RefAxis
double Radius
double SemiAngle
double Hmin
double Hmax
double Amin
double Amax
Returns
Type Description
bool

CreateConicalSpiral(string, TST3DPoint, TST3DPoint, TST3DPoint, double, double, double, double, bool)

Declaration
bool CreateConicalSpiral(string ID, TST3DPoint Location, TST3DPoint Axis, TST3DPoint RefAxis, double StartRadius, double TermRadius, double Step, double Distance, bool CCW)
Parameters
Type Name Description
string ID
TST3DPoint Location
TST3DPoint Axis
TST3DPoint RefAxis
double StartRadius
double TermRadius
double Step
double Distance
bool CCW
Returns
Type Description
bool

CreateCoordinateSystem(string, TST3DPoint, TST3DPoint, TST3DPoint)

Declaration
bool CreateCoordinateSystem(string CSID, TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX)
Parameters
Type Name Description
string CSID
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
Returns
Type Description
bool

CreateCurveOnSurface(string, string, string)

Create a 3D curve on the surface

Declaration
bool CreateCurveOnSurface(string ID, string CurveID, string SurfaceID)
Parameters
Type Name Description
string ID
  • The internal number of the entity
string CurveID
  • The internal number of the created curve
string SurfaceID
  • The internal number of the created surface
Returns
Type Description
bool

Success status

CreateCylinderP(string, TST3DPoint, TST3DPoint, TST3DPoint, double, double, double, double, double)

Declaration
bool CreateCylinderP(string ID, TST3DPoint Location, TST3DPoint Axis, TST3DPoint RefAxis, double Radius, double Hmin, double Hmax, double Amin, double Amax)
Parameters
Type Name Description
string ID
TST3DPoint Location
TST3DPoint Axis
TST3DPoint RefAxis
double Radius
double Hmin
double Hmax
double Amin
double Amax
Returns
Type Description
bool

CreateEllipse(string, double, double, TST3DPoint, TST3DPoint, TST3DPoint)

Declaration
bool CreateEllipse(string ID, double MajRad, double MinRad, TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX)
Parameters
Type Name Description
string ID
double MajRad
double MinRad
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
Returns
Type Description
bool

CreateEllipseArc(string, double, double, double, double, TST3DPoint, TST3DPoint, TST3DPoint)

Declaration
bool CreateEllipseArc(string ID, double MajRad, double MinRad, double SAng, double TAng, TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX)
Parameters
Type Name Description
string ID
double MajRad
double MinRad
double SAng
double TAng
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
Returns
Type Description
bool

CreateInversedCurve(string, string)

Create an inversed curve

Declaration
bool CreateInversedCurve(string ID, string SourceCurveID)
Parameters
Type Name Description
string ID
  • The internal number of the entity
string SourceCurveID
  • The internal number of the created curve
Returns
Type Description
bool

Success status

CreateLineSeg(string, TST3DPoint, TST3DPoint)

Declaration
bool CreateLineSeg(string ID, TST3DPoint sp, TST3DPoint tp)
Parameters
Type Name Description
string ID
TST3DPoint sp
TST3DPoint tp
Returns
Type Description
bool

CreateOffsetSurf(string, string, double)

Declaration
bool CreateOffsetSurf(string ID, string Surf, double Offset)
Parameters
Type Name Description
string ID
string Surf
double Offset
Returns
Type Description
bool

CreatePlaneP(string, TST3DPoint, TST3DPoint, TST3DPoint, double, double, double, double)

Declaration
bool CreatePlaneP(string ID, TST3DPoint Location, TST3DPoint Axis, TST3DPoint RefAxis, double xMin, double yMin, double xMax, double yMax)
Parameters
Type Name Description
string ID
TST3DPoint Location
TST3DPoint Axis
TST3DPoint RefAxis
double xMin
double yMin
double xMax
double yMax
Returns
Type Description
bool

CreatePoint(string, TST3DPoint)

Declaration
bool CreatePoint(string ID, TST3DPoint P)
Parameters
Type Name Description
string ID
TST3DPoint P
Returns
Type Description
bool

CreateRevSurface120(string, TST3DPoint, TST3DPoint, string, double, double)

Declaration
bool CreateRevSurface120(string ID, TST3DPoint Location, TST3DPoint Axis, string GeneratrixID, double sa, double ta)
Parameters
Type Name Description
string ID
TST3DPoint Location
TST3DPoint Axis
string GeneratrixID
double sa
double ta
Returns
Type Description
bool

CreateSolidEdge(string, string, string, string)

Create an edge for the solid

Declaration
bool CreateSolidEdge(string ID, string SourceCurveID, string svID, string tvID)
Parameters
Type Name Description
string ID
  • The internal number of the entity
string SourceCurveID
  • The internal number of the created curve
string svID
  • Start vertex
string tvID
  • End vertex
Returns
Type Description
bool

Success status

CreateSolidVertex(string, TST3DPoint)

Declaration
bool CreateSolidVertex(string ID, TST3DPoint P)
Parameters
Type Name Description
string ID
TST3DPoint P
Returns
Type Description
bool

CreateSphereP(string, TST3DPoint, TST3DPoint, TST3DPoint, double)

Declaration
bool CreateSphereP(string ID, TST3DPoint Location, TST3DPoint Axis, TST3DPoint RefAxis, double Radius)
Parameters
Type Name Description
string ID
TST3DPoint Location
TST3DPoint Axis
TST3DPoint RefAxis
double Radius
Returns
Type Description
bool

CreateTabSurface122(string, string, TST3DPoint)

Declaration
bool CreateTabSurface122(string ID, string GeneratrixID, TST3DPoint ExtrusionVector)
Parameters
Type Name Description
string ID
string GeneratrixID
TST3DPoint ExtrusionVector
Returns
Type Description
bool

CreateTorusP(string, TST3DPoint, TST3DPoint, TST3DPoint, double, double)

Declaration
bool CreateTorusP(string ID, TST3DPoint Location, TST3DPoint Axis, TST3DPoint RefAxis, double MajRad, double MinRad)
Parameters
Type Name Description
string ID
TST3DPoint Location
TST3DPoint Axis
TST3DPoint RefAxis
double MajRad
double MinRad
Returns
Type Description
bool

CreateTransposedUVSurface(string, string)

Create a transposed surface (swap U and V)

Declaration
bool CreateTransposedUVSurface(string ID, string SourceSurface)
Parameters
Type Name Description
string ID
  • The internal number of the entity
string SourceSurface
  • The internal number of the surface
Returns
Type Description
bool

Success status

CreateTrimmedCurve(string, string, double, double)

Declaration
bool CreateTrimmedCurve(string ID, string SourceCurveID, double t1, double t2)
Parameters
Type Name Description
string ID
string SourceCurveID
double t1
double t2
Returns
Type Description
bool

CreateTrimmedCurve2(string, string, TST3DPoint, TST3DPoint)

Declaration
bool CreateTrimmedCurve2(string ID, string SourceCurveID, TST3DPoint p1, TST3DPoint p2)
Parameters
Type Name Description
string ID
string SourceCurveID
TST3DPoint p1
TST3DPoint p2
Returns
Type Description
bool

CreateView(TST3DPoint, TST3DPoint, TST3DPoint, double, string)

Declaration
bool CreateView(TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX, double Scale, string ID)
Parameters
Type Name Description
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
double Scale
string ID
Returns
Type Description
bool

CutTo2d(TST2DPoint)

Declaration
bool CutTo2d(TST2DPoint P)
Parameters
Type Name Description
TST2DPoint P
Returns
Type Description
bool

CutTo3d(TST3DPoint)

Declaration
bool CutTo3d(TST3DPoint P)
Parameters
Type Name Description
TST3DPoint P
Returns
Type Description
bool

EndObject(object)

Write the geometry object to the SGF file

Declaration
bool EndObject(object obj)
Parameters
Type Name Description
object obj

Geometry object
Returns
Type Description
bool

Success status

EndPmiEntity()

Declaration
bool EndPmiEntity()
Returns
Type Description
bool

EndPmiText()

Declaration
bool EndPmiText()
Returns
Type Description
bool

InsertBlock(string, string)

Copy and paste the block into the geometric model tree

Declaration
bool InsertBlock(string BlockID, string NewBlockName)
Parameters
Type Name Description
string BlockID
  • The name of the block to copy and paste (BlockName in StartBlock)
string NewBlockName
  • The name of the group in the geometric model tree
Returns
Type Description
bool

Success status

LoadFile(string)

Load the file to CAM

Declaration
bool LoadFile(string GeomFile)
Parameters
Type Name Description
string GeomFile
  • The path to the file
Returns
Type Description
bool

Success status

LoadFileWithScale(string, bool)

Declaration
bool LoadFileWithScale(string GeomFile, bool ADeleteFile)
Parameters
Type Name Description
string GeomFile
bool ADeleteFile
Returns
Type Description
bool

PmiAddArrow(TST3DPoint, double, TSTPmiArrowType)

Declaration
bool PmiAddArrow(TST3DPoint vT, double Angle, TSTPmiArrowType ArrowType)
Parameters
Type Name Description
TST3DPoint vT
double Angle
TSTPmiArrowType ArrowType
Returns
Type Description
bool

PmiAddCurve(string, TSTPmiCurveType)

Declaration
bool PmiAddCurve(string CurveID, TSTPmiCurveType CurveType)
Parameters
Type Name Description
string CurveID
TSTPmiCurveType CurveType
Returns
Type Description
bool

PmiAddMesh(string)

Declaration
bool PmiAddMesh(string ID)
Parameters
Type Name Description
string ID
Returns
Type Description
bool

SetArcToler(double)

Declaration
bool SetArcToler(double Value)
Parameters
Type Name Description
double Value
Returns
Type Description
bool

SetCurrentColor(int)

Declaration
bool SetCurrentColor(int Value)
Parameters
Type Name Description
int Value
Returns
Type Description
bool

SetCurrentLineType(TSTLineType)

Declaration
bool SetCurrentLineType(TSTLineType Value)
Parameters
Type Name Description
TSTLineType Value
Returns
Type Description
bool

SetCurrentLineWidth(int)

Declaration
bool SetCurrentLineWidth(int Value)
Parameters
Type Name Description
int Value
Returns
Type Description
bool

SetCurrentTransform(TST3DPoint, TST3DPoint, TST3DPoint)

Declaration
bool SetCurrentTransform(TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX)
Parameters
Type Name Description
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
Returns
Type Description
bool

SetCurrentTransform2(TST3DPoint, TST3DPoint, TST3DPoint, TST3DPoint)

Declaration
bool SetCurrentTransform2(TST3DPoint vT, TST3DPoint vX, TST3DPoint vY, TST3DPoint vZ)
Parameters
Type Name Description
TST3DPoint vT
TST3DPoint vX
TST3DPoint vY
TST3DPoint vZ
Returns
Type Description
bool

SetCurveDomain(string, double, double, double, double)

Declaration
bool SetCurveDomain(string ID, double SrcTmin, double SrcTmax, double PrxTmin, double PrxTmax)
Parameters
Type Name Description
string ID
double SrcTmin
double SrcTmax
double PrxTmin
double PrxTmax
Returns
Type Description
bool

SetCurveParametrization(string, double, double)

Declaration
bool SetCurveParametrization(string CurveID, double TMin, double TMax)
Parameters
Type Name Description
string CurveID
double TMin
double TMax
Returns
Type Description
bool

SetGroupEntityIsSolid(bool)

Declaration
bool SetGroupEntityIsSolid(bool Value)
Parameters
Type Name Description
bool Value
Returns
Type Description
bool

SetIgnoreOutOfRange(bool)

Declaration
bool SetIgnoreOutOfRange(bool Value)
Parameters
Type Name Description
bool Value
Returns
Type Description
bool

SetImportOption(TSTImportOption, bool)

Declaration
bool SetImportOption(TSTImportOption OptionType, bool OptionValue)
Parameters
Type Name Description
TSTImportOption OptionType
bool OptionValue
Returns
Type Description
bool

SetModelUnits(TST_LinearMeasure, double)

Declaration
bool SetModelUnits(TST_LinearMeasure Units, double MultScale)
Parameters
Type Name Description
TST_LinearMeasure Units
double MultScale
Returns
Type Description
bool

SetNurbsCurveControlPoint(int, TST3DPoint)

Declaration
bool SetNurbsCurveControlPoint(int Index, TST3DPoint P)
Parameters
Type Name Description
int Index
TST3DPoint P
Returns
Type Description
bool

SetNurbsCurveKnot(int, double)

Declaration
bool SetNurbsCurveKnot(int Index, double knot)
Parameters
Type Name Description
int Index
double knot
Returns
Type Description
bool

SetNurbsCurveWeight(int, double)

Declaration
bool SetNurbsCurveWeight(int Index, double w)
Parameters
Type Name Description
int Index
double w
Returns
Type Description
bool

SetNurbsSurfaceControlPoint(int, int, TST3DPoint)

Declaration
bool SetNurbsSurfaceControlPoint(int i, int j, TST3DPoint P)
Parameters
Type Name Description
int i
int j
TST3DPoint P
Returns
Type Description
bool

SetNurbsSurfaceUKnot(int, double)

Declaration
bool SetNurbsSurfaceUKnot(int i, double Value)
Parameters
Type Name Description
int i
double Value
Returns
Type Description
bool

SetNurbsSurfaceVKnot(int, double)

Declaration
bool SetNurbsSurfaceVKnot(int i, double Value)
Parameters
Type Name Description
int i
double Value
Returns
Type Description
bool

SetNurbsSurfaceWeight(int, int, double)

Declaration
bool SetNurbsSurfaceWeight(int i, int j, double Value)
Parameters
Type Name Description
int i
int j
double Value
Returns
Type Description
bool

SetPmiAssociativity(int, string)

Declaration
bool SetPmiAssociativity(int i, string ObjId)
Parameters
Type Name Description
int i
string ObjId
Returns
Type Description
bool

SetPmiPreferenceD(string, double)

Declaration
bool SetPmiPreferenceD(string Path, double Value)
Parameters
Type Name Description
string Path
double Value
Returns
Type Description
bool

SetPmiPreferenceI(string, int)

Declaration
bool SetPmiPreferenceI(string Path, int Value)
Parameters
Type Name Description
string Path
int Value
Returns
Type Description
bool

SetSurfaceUVDomain(string, double, double, double, double, double, double, double, double, bool)

Declaration
bool SetSurfaceUVDomain(string ID, double SrcUmin, double SrcUmax, double SrcVmin, double SrcVmax, double PrxUmin, double PrxUmax, double PrxVmin, double PrxVmax, bool TransposeUV)
Parameters
Type Name Description
string ID
double SrcUmin
double SrcUmax
double SrcVmin
double SrcVmax
double PrxUmin
double PrxUmax
double PrxVmin
double PrxVmax
bool TransposeUV
Returns
Type Description
bool

StartBlock(string)

Start forming a block (assembly element). It contains one model with topology (ComboModel), which must be reused during the import process. The block is placed in a buffer, from which it is inserted into the geometric model tree using InsertBlock

Declaration
bool StartBlock(string BlockName)
Parameters
Type Name Description
string BlockName
  • The unique name of the block (ComboModel)
Returns
Type Description
bool

Success status

StartComboModel(string)

Start forming a model with topology (ComboModel). The Model will be sewn

Declaration
bool StartComboModel(string GeomFile)
Parameters
Type Name Description
string GeomFile
  • The unique name of the model
Returns
Type Description
bool

Success status

StartComboSolid(string)

Start forming a solid with topology (ComboSolid)

Declaration
bool StartComboSolid(string ID)
Parameters
Type Name Description
string ID
  • Name of the solid
Returns
Type Description
bool

Success status

StartCurve2d(string, TST2DPoint, TST3DPoint, TST3DPoint, TST3DPoint)

Declaration
bool StartCurve2d(string ID, TST2DPoint P, TST3DPoint vT, TST3DPoint vZ, TST3DPoint vX)
Parameters
Type Name Description
string ID
TST2DPoint P
TST3DPoint vT
TST3DPoint vZ
TST3DPoint vX
Returns
Type Description
bool

StartCurve3d(string, TST3DPoint)

Declaration
bool StartCurve3d(string ID, TST3DPoint P)
Parameters
Type Name Description
string ID
TST3DPoint P
Returns
Type Description
bool

StartFace(string, string, bool)

Declaration
bool StartFace(string ID, string SurfaceID, bool NormalOrientation)
Parameters
Type Name Description
string ID
string SurfaceID
bool NormalOrientation
Returns
Type Description
bool

StartFaceLoop()

Start forming a face loop

Declaration
bool StartFaceLoop()
Returns
Type Description
bool

Success status

StartGroupEntity(string)

Start forming a geometric group

Declaration
bool StartGroupEntity(string EntityName)
Parameters
Type Name Description
string EntityName
  • The name of the group
Returns
Type Description
bool

Success status

StartIntersectionCurve(string, string, string, TSTLimitType, TSTLimitType, double, double)

Declaration
bool StartIntersectionCurve(string ID, string FirstSurfID, string SecondSurfID, TSTLimitType L1, TSTLimitType L2, double BaseParam, double BaseScale)
Parameters
Type Name Description
string ID
string FirstSurfID
string SecondSurfID
TSTLimitType L1
TSTLimitType L2
double BaseParam
double BaseScale
Returns
Type Description
bool

StartMesh(string)

Start forming a mesh

Declaration
bool StartMesh(string ID)
Parameters
Type Name Description
string ID
  • The internal number of the entity
Returns
Type Description
bool

Success status

StartModel()

Start forming a model

Declaration
bool StartModel()
Returns
Type Description
bool

Success status

StartNurbsCurve(string, int, bool, bool, bool, int, int)

Declaration
bool StartNurbsCurve(string ID, int Degree, bool IsPeriodic, bool IsRational, bool IsClosed, int KnotCount, int CPCount)
Parameters
Type Name Description
string ID
int Degree
bool IsPeriodic
bool IsRational
bool IsClosed
int KnotCount
int CPCount
Returns
Type Description
bool

StartNurbsSurface(string, int, int, int, int, bool, bool, bool, bool, bool)

Declaration
bool StartNurbsSurface(string ID, int K1, int K2, int UDegree, int VDegree, bool UClosed, bool VClosed, bool UPeriodic, bool VPeriodic, bool Rational)
Parameters
Type Name Description
string ID
int K1
int K2
int UDegree
int VDegree
bool UClosed
bool VClosed
bool UPeriodic
bool VPeriodic
bool Rational
Returns
Type Description
bool